| 1. |
Remove the shift knob.
|
| 2. |
Remove the spring and the cap (for 6-speed
M/T).
|
| 3. |
Remove the skirt (for 6-speed
M/T).
|
| 4. |
Remove the console upper cover.
|
| 5. |
Remove the console assembly.
|
| 6. |
Remove the shift cable clip.
|
| 7. |
Remove the select cable clip.
|
| 8. |
Remove the snap pin of the select
cable.
|
| 9. |
Remove the shift cable.
|
| 10. |
Remove the shift lever assembly.
|
For 6-speed M/T, push the plate shaft
outward with a driver or equivalent through the hole in the
shift lever bracket to remove it.
| |
Install the shift lever
assembly.
| 1. |
Check the select cable for proper operation
and for damage. |
| 2. |
Check the shift cable for proper operation and
for damage. |
| 3. |
Check the boot for
damage. |
| 4. |
Check each bushing for wear, abrasion,
sticking, restricted movement or
damage. |
| 5. |
Check for a weak or damaged
spring. |
